AnexSecure Surveillance Solutions

All the smoke sensors will be connected directly to the main panel - 4 loop control panel directly.
Each loop will have a capacity to connect upto 150 detectors in series at a max distance of 2 kms
Multiple panic switches can connected on the layout with multiple sounders with recommended limit of 75 db
GSM Module can be provided with inbuilt keypad to ensure quick response
All systems will be operational in tandem and can be customized to suit your floor layout

Fire Alarm Repeater Panel is an alternate panel used to show the same display and audible signals as the main control panel
This panel is usually placed in the security room for monitoring purpose

The main components of a fire alarm system are input and output devices. These devices work as a team. The data coming from input devices is evaluated by fire alarm panel. Then fire alarm panel triggers output devices in terms of fire scenarios.
These product helps to address and identify the Input / output Products like Smoke detector , Sounder , MCP etc
It also helps to provide additional Power if required

The alarm contains a pulsed Infrared LED which pulses a beam of light into the sensor chamber every 10 seconds to check for smoke particles.
The Range of Smoke detector is a radius of 4Meters
The alarm will be triggered as soon as it observes the Smoke particles.
Operating Volt :- 12V

Manual alarm call points are designed for the purpose of raising an alarm manually once verification of a fire or emergency condition exists, by operating the push button or break glass the alarm signal can be raised.
Each MCP are addressable to main panel
Incase of any fire Emergency we can manually trigger the MCP. This helps Main Control to identity and trigger the Hooter and Dialer